NEW Dynavector 10XA, we can’t wait!

24 June 2025

This is very exciting news from Dynavector: the much-loved and exceptionally good 10X moving coil range of cartridges has a new model – 10XA.

Since it’s first cartridge in 1978, 10X has had a special place in the hearts of vinyl enthusiasts, none more so than us! Now, reborn with cutting edge “Special Magnetic Annealing”, a proprietary Dynavector technology, 10XA looks set to take the series to new heights of performance with a remarkable leap in sound quality—one that far exceeds the expectations for an entry-level model.

There are two variants – 10XA H and 10XA L (high and low output) moving coils, both priced at a very competitive £649.

Trade in deal
Existing 10X users will be eligible for a special exchange price when upgrading to the new 10XA. Call for details – 01244 345576.

10X5 mkII
The 10X5 mkII continues in production until next year at a reduced price of £549.

Special Annealing Magnetic Circuit
The magnetic circuit, which is the core of an MC cartridge, uses pure iron that has stable magnetic properties with minimal distortion. Furthermore, by performing special annealing that focuses on optimizing the magnetic annealing process such as annealing temperature, environment, heating duration, and heating / cooling rates, we have succeeded in delivering expansive resonant sound without distortion and unrivalled resolution.

10XA-H: The Legendary High Output MC Cartridge
Dynavector’s unique coil winding technology made high output MC cartridges possible. By winding an ultra-fine wire many times around the coil bobbin, the phono cartridge can retain a healthy 2.8mV output, eliminating the need for a head amplifier or a step-up transformer. It retains the sonic advantages of an MC cartridge while offering the ease of use of an MM cartridge.
Recommended load impedance is 1,000Ω or higher.
Connection to a PHONO input in MM position (47KΩ load) is also possible.

10XA-L: A Low Output Model that Captures the True Characteristics of an MC
The low-output 10XA-L model offers an output voltage of 0.5mV, allowing excellent compatibility with a wide range of step-up transformers and head amplifiers. This model lets you fully experience the distinct qualities of MC playback. Recommended load impedance is 100Ω or higher.

Shibata Type III Stylus for Exceptional High Frequency Performance
To meet the demands of today’s wide range analogue playback systems, the 10XA features a Shibata Type III stylus, known for its superior high-frequency response. The cantilever is made from lightweight, rigid aluminium pipe. This improves groove tracking significantly, enabling higher resolution playback.

Neodymium Magnet and Softened Magnetic Field
This series employs a patented “Softened Magnet” technology developed to reduce distortion and harsh irritating edgy sounds caused by rare earth magnets, while still achieving high output from powerful neodymium magnets. By taking advantage of the powerful magnetic force of neodymium magnets, the phono cartridge produces a clean, well separated sound.

Broad Compatibility
The machined aluminium head block ensures a secure, rigid connection to the headshell. With a compliance of 12mm/N and a total weight of 7.5g, the 10XA is compatible with the vast majority of tonearms in the market.

Specifications
Type: High/Low output moving coil cartridge with flux damper and softened magnetism
Output Voltage: 2.8 mV / 0.5 mV (at 1KHz, 5cm/sec.)
Channel Separation: 25 dB (at 1KHz)
Channel balance: 1.0 dB (at 1KHz)
Frequency response: 20 – 20,000 Hz（±2dB）
Compliance: 12 mm/N
Tracking force: 1.8 – 2.2 g
Impedance: 150 ohms / 32 ohms
Recommended load impedance:1,000 ohms / > 100 ohms
Cantilever: 6mm length hardened aluminium pipe
Stylus tip: Nude Diamond “Shibata III” Line Contact
Weight: 7.5 g

We’re expecting our 10XA cartridges in a couple of weeks, get in touch to enquire – 01244 345576 or rob@adventuesinhifi.com